Sierra Denali RWD V8-6.2L (2009)
15. Tighten the CMP actuator solenoid valve.
1. Tighten the bolt a first pass to 65 Nm (48 lb ft).
2. Tighten the bolt a final pass an additional 90 degrees using J 45059 .
16. Remove the J 42386-A (1) and bolts.
17. Install the starter motor. Refer to Starter Replacement (4.8L, 5.3L, 6.0L, and 6.2L) (See: Starting and Charging/Starting System/Starter
Motor/Service and Repair)Starter Replacement (4.3L) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair)Starter
Replacement (6.6L) (See: Starting and Charging/Starting System/Starter Motor/Service and Repair) .
18. Install the oil pump. Refer to Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (LH6, LMG, LY2 and LY5) (See: Engine
Lubrication/Oil Pump/Service and Repair)Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (Except LH6, LMG, LY2 and LY5) (
See: Engine Lubrication/Oil Pump/Service and Repair) .