Sierra Denali RWD V8-6.2L (2009)
*
Inspect for evidence of improper arcing.
-
Measure the gap between the center electrode (4) and the side electrode (3). Refer to Ignition System Specifications (See: Powertrain
Management/Ignition System/Specifications) . An excessively wide electrode gap can prevent correct spark plug operation.
-
Inspect for the correct spark plug torque. Refer to Ignition System Specifications (See: Powertrain Management/Ignition
System/Specifications) . Insufficient torque can prevent correct spark plug operation. An over torqued spark plug, causes the insulator (2) to
crack.
-
Inspect for signs of tracking that occurred near the insulator tip instead of the center electrode (4).
-
Inspect for a broken or worn side electrode (3).
-
Inspect for a broken, worn, or loose center electrode (4) by shaking the spark plug.
*
A rattling sound indicates internal damage.
*
A loose center electrode (4) reduces the spark intensity.
-
Inspect for bridged electrodes (3, 4). Deposits on the electrodes (3, 4) reduce or eliminates the gap.
-
Inspect for worn or missing platinum pads on the electrodes (3, 4), if equipped.
-
Inspect for excessive fouling.
*
Inspect the spark plug recess area of the cylinder head for debris. Dirty or damaged threads can cause the spark plug not to seat correctly
during installation.
Visual Inspection
*
Normal operation - Brown to grayish-tan with small amounts of white powdery deposits are normal combustion by-products from fuels with
additives.
*
Carbon fouled - Dry, fluffy black carbon, or soot caused by the following conditions:
-
Rich fuel mixtures
*
Leaking fuel injectors
*
Excessive fuel pressure
*
Restricted air filter element
*
Incorrect combustion
-
Reduced ignition system voltage output
*
Weak ignition coils
*
Worn ignition wires
*
Incorrect spark plug gap
-
Excessive idling or slow speeds under light loads can keep spark plug temperatures so low that normal combustion deposits may not burn off.
*
Deposit fouling - Oil, coolant, or additives that include substances such as silicone, very white coating, reduces the spark plug intensity. Most
powdery deposits will not affect spark plug intensity unless they form into a glazing over the electrode.