Sierra Denali RWD V8-6.2L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
5. Tighten the exhaust pipe bolts in the sequence shown to 53 Nm (39 lb ft) .
6. Install the exhaust pipe heat shield bolts and tighten to 10 Nm (89 lb in) .
7. Install the left side exhaust heat shield (3) at the dash panel.
8. Install the heat shield nuts (2) and tighten to 9 Nm (80 lb in) .
9. Install the transmission. Refer to Transmission Replacement (See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and
Repair/Removal and Replacement) .