gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Camshaft Position Actuator Magnet Replacement|Page 5867 > < Camshaft Position Actuator Magnet Replacement|Page 5865
Page 8
background image

Caution:  Refer to Fastener Caution   (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .

8. Tighten the CMP actuator solenoid valve.

1. Tighten the valve a first pass to 65 Nm (48 lb ft) .
2. Tighten the valve a final pass and additional90 degrees using J 45059   .

9. Install the oil pump. Refer to Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (LH6, LMG, LY2 and LY5)   (See: Engine, Cooling

and Exhaust/Engine/Engine Lubrication/Oil Pump/Service and Repair)Oil Pump, Screen, and Crankshaft Oil Deflector Replacement (Except LH6,
LMG, LY2 and LY5)   (See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Pump/Service and Repair) .

Camshaft Position Actuator Magnet Replacement|Page 5867 > < Camshaft Position Actuator Magnet Replacement|Page 5865