Sierra Denali RWD V8-6.2L (2009)
2. Install the EVAP pipe to the fuel tank clips (1 and 2).
3. Position and connect the EVAP pipe quick connect fittings to the fuel tank module. Refer to Plastic Collar Quick Connect Fitting Service (See:
Fuel Delivery and Air Induction/Fuel Line Coupler/Service and Repair/Plastic Collar Quick Connect Fitting Service) .
4. Install the EVAP pipe to the fuel tank clips (1).
5. Remove the fuel tank. Refer to Fuel Tank Replacement (35 Reg/Ext/Crew Cab w/34 Gal Tank) (See: Fuel Delivery and Air Induction/Fuel
Tank/Service and Repair)Fuel Tank Replacement (15 Ext/Crew Cab w/26 Gal Tank) (See: Fuel Delivery and Air Induction/Fuel Tank/Service
and Repair)Fuel Tank Replacement (15/25 Reg/Ext/Crew Cab w/34 Gal Tank) (See: Fuel Delivery and Air Induction/Fuel Tank/Service and
Repair)Fuel Tank Replacement (15 Rec Cab w/26 Gal Tank) (See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair)Fuel Tank
Replacement (25 Ext/Crew Cab w/26 Gal Tank) (See: Fuel Delivery and Air Induction/Fuel Tank/Service and Repair) .
Evaporative Emission System Hose/Pipe Replacement (Reg/Ext/Crw Cab With 34 gal Tnk)
Evaporative Emission System Hoses/Pipes Replacement (15/25 Reg/Ext/Crew Cab w/34 gal Tank)
Removal Procedure
Important: Clean all fuel and evaporative emission (EVAP) line connections and surrounding areas prior to disconnecting the lines in order to
avoid possible fuel and/or EVAP system contamination.