Sierra Denali RWD V8-6.2L (2009)
2. Install the auxiliary battery positive cable to the auxiliary battery relay.
3. Install the auxiliary battery positive cable nut (4) to the battery relay stud and tighten to 9 Nm (80 lb in) .
4. Position the auxiliary battery positive cable boot (5) to the auxiliary battery relay stud.
5. Connect the auxiliary battery positive cable electrical connector (1) to the battery relay.
6. Install the auxiliary battery positive cable to the auxiliary battery relay.
7. Install the auxiliary battery positive cable nut (6) to the battery relay stud and tighten to 9 Nm (80 lb in) .
8. Position the auxiliary battery positive cable boot (5) to the auxiliary battery relay stud.
9. Connect the auxiliary battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (With Single Battery) (See: Battery
Cable/Service and Repair)Battery Negative Cable Disconnection and Connection (With Auxiliary Battery) (See: Battery Cable/Service and
Repair)Battery Negative Cable Disconnection and Connection (With Dual Batteries) (See: Battery Cable/Service and Repair) .