Sierra Denali RWD V8-6.2L (2009)
10. Install the positive battery cable clips (2, 3, and 4) to the frame crossmember.
11. Install the engine shield. Refer to Engine Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service and Repair/Engine Shield
Replacement) .
12. Lower the vehicle.
13. Install the positive battery cable lead (5) to the mega fuse stud.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
14. Install the positive battery cable nut (1) to the mega fuse stud and tighten to 9 Nm (80 lb in) .
15. Install the auxiliary BEC cover (1).
16. Enable the high voltage system. Refer to High Voltage Enabling () .