Sierra Denali RWD V8-6.2L (2009)
1. If the starter was replaced, install the starter heat shield.
2. If the starter was replaced, snap the transmission cover onto the starter.
3. Install the starter in through the wheel well opening.
4. Install the starter solenoid cable to the starter.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
5. Install the starter solenoid cable nut (1).
Tighten the nut to 9 Nm (80 lb in).