Sierra Denali RWD V8-6.2L (2009)
Tighten the bolts to 12 Nm (106 lb in).
Note
The power steering assist motor electrical harness connector should engage smoothly as it is pushed on. Do NOT force the electrical connector.
7. Engage the power steering assist motor electrical harness connectors (1) to the electronic power steering control module.
8. Ensure the connector cam lever (3) and the connector cam lever lock tab (2) are fully engaged.
The connector in the graphic is shown upside down for clarity.
9. Secure the power steering assist motor electrical harness connector position assurance tab (3).
10. Install the engine shield. Refer to Engine Shield Replacement (See: Body and Frame/Frame/Skid Plate/Service and Repair/Engine Shield
Replacement) .
11. Install the air cleaner resonator outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement (See: Engine, Cooling and
Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Air Cleaner Fresh Air Duct/Hose/Service and Repair) .
12. Perform the high voltage enabling procedure. Refer to High Voltage Enabling () .