Sierra Denali RWD V8-6.2L (2009)
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution) .
Note
*
Ensure the flat of the valve, lines up with the flats of the snap in the enclosure.
*
TPM valves and TORX screws are one-time use only.
1. Assemble the tire pressure sensor (2) to the valve stem and install the new TORX screw (3) and tighten to 1.3 Nm (11.5 lb in) .
Note
Use and approved tire mounting lubricant. DO NOT use silicon or corrosive base compounds to lubricate the tire bead and the wheel rim. A corrosive
type compound can cause tire or rim deterioration.
2. Apply tire soap to the rubber portion of the valve stem (1).
3. Using a tire valve stem mounting tool, pull the valve stem through in a direction parallel to the valve hole on the rim.