Sierra Denali RWD V8-6.2L (2009)
![background image](/gmc/sierra_denali_rwd/v8-6.2l/Page-1665005.png)
4. Install the selective shim (1) on the shoulder on the differential pinion gear (2).
Note
Press the bearing on until the cone seats on the pinion shim.
5. Using the J 22828 - installer or the J 36614 - installer , install the inner pinion bearing.
6. Install a new collapsible spacer.
7. Lubricate the pinion bearings with axle lubricant. Use the proper fluid. Refer to Fluid and Lubricant Recommendations .
8. Install the outer pinion bearing into the axle housing.
9. Install the differential pinion gear into the axle housing.
Note
DO NOT re-use the old pinion nut, replace with NEW only.