Sierra Denali RWD V8-6.2L (2009)
7. Install the flywheel housing bolts, denoted by the black circles.
Tighten the bolts to 90 Nm (67 lb ft).
8. Install the oil cooler adapter studs and nuts to the flywheel housing.
*
Tighten the oil cooler adapter studs to 10 Nm (89 lb in).
*
Tighten the oil cooler adapter nuts to 25 Nm (18 lb ft).
9. Install the oil filter.
10. Install the upper oil pan. Refer to Upper Oil Pan Replacement (See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Pan/Service
