Suburban 3/4 Ton 2WD V8-305 5.0L (1986)
Engine Oil Drain Plug: Technical Service Bulletins
Engine Oil Drain Plug Gasket - Revised
Number:
86-118
Section:
6A & 0B
Date:
JULY, 1986
Subject:
NEW ENGINE OIL DRAIN PLUG GASKET TO REPLACE COPPER GASKET
Model and Year:
ALL 1986 AND PAST MODEL YEARS APPLICATIONS OF V-8, V-6, OHV L-4 WITH THE FOLLOWING VIN CODES
^
PASSENGER CAR - F,G,H,P,S,W,X,Y,Z,6,8
^
TRUCK - F,H,K,L,M,N,R,W,Z
TO:
ALL CHEVROLET DEALERS
An improved oil drain plug gasket, P/N 14090908, is available to replace the copper gasket. The new gasket is a steel washer with captured O-ring
(Viton).
The new O-ring/steel gasket is capable of sealing irregular surfaces with light torques while retaining the clamping load over time. Reuse of the
O-ring/steel gasket does not lessen sealing or torque retention characteristics.
Recommended torque for the O-ring/steel gasket is 12-20 ft.lbs. (16-27 N-m).
Excessively higher torques may cause deformation, splitting, or loss of sealing capability.
This is an informational bulletin.