Suburban 3/4 Ton 4WD V8-305 5.0L (1986)
Brake Caliper: Service and Repair
Bendix Single Piston Sliding Caliper
Removal
For additional information see Removal Notes. See: Fundamentals and Basics
Fig. 2 Bottoming position in bore
1.
Siphon two-thirds of brake fluid from master cylinder reservoir serving front disc brakes.
2.
Raise vehicle, support on jack stands and remove front wheels.
3.
Bottom the caliper piston in bore. Insert a screwdriver between inboard pad and piston, then pry piston back into bore. The piston can also be
bottomed in the bore with a large C-clamp, Fig. 2.
Fig. 3 Removing caliper support key
4.
Remove support key retaining screw.
5.
Drive caliper support key and spring from steering knuckle with a suitable drift and hammer, Fig. 3.
