Suburban 3/4 Ton 4WD V8-305 5.0L (1986)
Brake Pad: Service and Repair
Delco-Moraine Single Piston Caliper
Removal
Caliper Assembly
1.
Remove caliper assembly. See Brake Caliper / Service and Repair. See: Brake Caliper/Service and Repair
2.
Remove inboard pad. Dislodge outboard pad and position caliper on the front suspension so the brake hose will not support the weight of the
caliper.
CAUTION: Do not allow caliper to hang from brake hose.
3.
Remove pad support spring from piston.
4.
Remove two sleeves from inboard ears of the caliper.
5.
Remove four rubber bushings from the grooves in each of the caliper ears.
Installation
