Suburban 3/4 Ton 4WD V8-305 5.0L (1986)
Caliper Knuckle Clearances
8. Measure the clearance between the caliper and the steering knuckle. The clearance at each end of the caliper should be measured individually and
added together. this total should be between 0.26-0.60 mm (0.010-0.024 inch).
9. Install tire and wheel assembly.
10. Lower the vehicle.
WARNING: Before moving vehicle, pump brake pedal several times to be sure it is firm. Do not move vehicle until a firm pedal is
obtained.
