Suburban 3/4 Ton 4WD V8-305 5.0L (1986)
3. Using appropriate tool remove adjusting nut from housing tube.
4. Pull hub and drum straight off axle housing. If brake lining is dragging on brake drum, back off brake adjustment by rotating adjustment screw.
Installation
Axle Shaft Components
Fig. 7 Measuring Brake Drum Inside Diameter
Fig. 8 Adjusting Brake Shoes To Brake Drum Inside Diameter
1. If brake shoes have been replaced or the adjusting screw has been moved the shoes should be adjusted. To do this use a suitable brake drum to
