Suburban 3/4 Ton 4WD V8-305 5.0L (1986)
Wheel Cylinder: Service and Repair
Installation
For additional information see Notes, Warnings, and Hints. See: Fundamentals and Basics
1. Wipe end of hydraulic line to remove any foreign matter, then place wheel cylinder in position. Enter tubing into cylinder and start threads on
fitting.
2. Install wheel cylinder bolts and tighten to backing plate.
3. Tighten brake line.
4. Install brake shoes.
5. Install brake drum.
6. Install wheel and tire assembly.
7. Bleed the brake system.
8. Adjust parking brake.
