Suburban 3/4 Ton 4WD V8-305 5.0L (1986)
Fig. 2 Electric cooling fan wiring harness installation
Fig. 3 Electric cooling fan temperature sender installation
As of January 1, 1985, all C, K, R and V-20/2500-30/3500 models equipped with the V8-454 engine and heavy duty emissions systems are equipped
with an auxiliary electric engine cooling fan. Similar 1982---85 truck models not equipped with the fan may have one installed using the following
procedure:
1.
Disconnect battery ground cable.
2.
Remove grille assembly.
3.
Drill mounting holes and install fan assembly (part No. 15593566), Fig. 1.
4.
Drain cooling system, then install fan relay (part No. 14078902), Fig. 2.
5.
Install fan wiring harness (part No. 12064526), Fig. 2. Secure harness to fender and radiator support away from sharp edges.
