gmc Workshop Repair Guides

GMC Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 1
background image

Blower Motor Switch: Service and Repair

C, K, R & V SERIES

1.

Disconnect battery ground cable, then remove instrument panel bezel.

2.

Remove control assembly to instrument panel attaching screws, then allow control assembly to rest on radio.

3.

Remove switch to control assembly attaching screws, then disconnect harness leads and remove switch from vehicle.

4.

Reverse procedure to install. 

Sensors and Switches > Sensors and Switches - HVAC > Blower Motor Switch > Component Information > Service and Repair

< PREV PAGE NEXT PAGE >