Suburban 3/4 Ton 4WD V8-305 5.0L (1986)
Oxygen Sensor: Description and Operation
The exhaust oxygen sensor is located in the exhaust system and monitors oxygen content in the exhaust gas stream. Varying concentration of oxygen in
the exhaust gas causes the O2 sensor to produce a varying voltage output. By monitoring the O2 sensor output voltage, the ECM can determine the
amount of oxygen in the exhaust gas and adjust the air/fuel mixture accordingly.
Rich air/fuel ratio = low oxygen content and high signal output (0.45-1.0 volt)
Lean air/fuel ratio = high oxygen content and low signal output (below 0.45 volt).
