Suburban 3/4 Ton 4WD V8-305 5.0L (1986)
CAUTION: Do not remove the adjusting ring (300) unless new ball joints are being installed. If it is necessary to loosen the ring to
remove the knuckle, do not loosen it more than two threads. Use special tool j 23447. The nonhardened threads in the yoke can be easily
damaged by the hardened threads in the adjusting ring if caution is not used during knuckle removal.
10. Steering knuckle from the axle yoke.
^
Insert a wedge shaped tool between the lower ball joint and the yoke. Tap on the tool to release the knuckle assembly.
^
Insert the wedge shaped tool between the upper ball joint and the yoke. Tap on the tool to release the knuckle assembly.
INSTALL
1. Reverse procedure to install. Adjust wheel bearings. See Wheel Bearing / Adjustments. See: Suspension/Wheel Bearing/Adjustments
