gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

08-07-30-017 > < A/T - No Movement in Drive or 3rd Gear|Page 2948
Page 3
background image

interchangeable.

Important:

The wear plate (640) and input thrust washer (660) are not required with the new sprag. Use of the thrust washer and wear plate with the new sprag
assembly will cause a misbuild (correct end play cannot be obtained).

Parts Information

Warranty Information

For vehicles repaired under warranty, use the table.

Disclaimer

08-07-30-017 > < A/T - No Movement in Drive or 3rd Gear|Page 2948