Suburban 3/4 Ton 4WD V8-305 5.0L (1986)
1.
Remove long bolt from cap of J 38119.
2.
Place new bushing over segmented collet.
3.
Slide black expansion tube into segments.
4.
Turn cap to lock collet into place.
5.
Install new bushing into transmission by driving J 38119 in firmly with a plastic hammer
6.
Turn cap to unlock collet.
7.
Remove J 38119.
8.
Remove collet.
9.
Install rear case seal.
10.
Connect propshaft to rear of transmission.
SERVICE MANUAL REFERENCE:
This procedure is not currently included in any Service Manual.
