Suburban 3/4 Ton 4WD V8-305 5.0L (1986)
Fig. 8 Exploded view of Spicer manual locking hub
Removal
1.
Position actuator knob in ``LOCK,'' then raise and support vehicle. Rotate tire to ensure engagement of hub lock.
2.
Remove retaining plate attaching bolts, then the retaining plate, actuating knob and O-rings.
3.
Remove internal snap ring, outer clutch retaining ring, actuating cam body, outer clutch gear and pressure spring, Fig. 8.
4.
Remove axle shaft snap ring, then the inner clutch ring.
5.
Remove spring retainer plate, if equipped.
Installation
1.
Install spring retainer plate, if equipped, over spindle nuts and against wheel bearing outer cup. Ensure flanged side of plate faces toward wheel
bearing.
2.
Install inner clutch ring onto axle shaft, press ring inward, then install snap ring.
3.
Install pressure spring with larger side facing inward.
4.
Install outer clutch gear, actuating cam body, outer clutch retaining ring and the internal snap ring. Ensure actuating cams face outward.
5.
Install O-ring, actuating knob, actuating knob O-ring and the retaining plate.
6.
Install retaining plate attaching bolts and torque to 38 inch lbs.
