Suburban 3/4 Ton 4WD V8-350 5.7L (1985)
Brake Drum: Service and Repair
Semi-Floating Axle
Removal
Rear Drum Assembly
1. Raise and support vehicle.
2. Remove tire and wheel assembly.
3. Remove brake drum. If brake lining is dragging on brake drum, back off brake adjustment by rotating adjustment screw. If brake drum is rusted or
corroded to axle flange and cannot be removed, lightly tap axle flange to drum mounting surface with a suitable hammer.
NOTE: For additional information see Notes, Warnings, and Hints. See: Fundamentals and Basics
Installation
Rear Drum Assembly