Suburban 3/4 Ton 4WD V8-393 6.5L DSL Turbo (1993)
Rear Door Hinge: By Symptom
Technical Service Bulletin # 361014B
Date: 961001
Doors - Rear Cargo Door Difficult To Open/Hinge Binds
File In Section: 10 - Body
Bulletin No.: 36-10-14B
Date: October, 1996
Subject:
Rear Cargo Door Hinge Binds (Replace Corroded Pins and Bushings)
Models:
1992-97 Chevrolet and GMC C/K Suburbans
1985-93 Chevrolet and GMC M/L Vans
This bulletin is being revised to add the 1995-97 model years for Suburban models.
Please discard Corporate Bulletin Number 36-10-14A (Section 10 - Body).
Condition
Some customers may comment that the rear cargo door hinges bind or the doors are hard to open on their vehicles.
Cause
Rear cargo door hinges are exposed to the environmental elements which causes the pins and bushings to become corroded in the hinge housing.
Correction
To correct this condition, replace the corroded pins and bushings using Kent Moore tool # J 41226.
Parts Information
P/N
Description
Qty.
15645336
C/K Rear Cargo Door Hinge Pins
5 per package
15598845
M/L Rear Cargo Door Hinge Pins
1 per package
15985132
Rear Cargo Door Teflon Coated Bushings
5 per package
Parts are currently available from GMSPO.
Warranty Information
For vehicles repaired under warranty, use:
Labor Op
Description
Labor Time
B6131
Cargo Door Hinge Pins Remove (LH)
1.1 hrs
B6130
Cargo Door Hinge Pins Remove (RH)
1.1 hrs
Important:
Labor operation is coded to base vehicle coverage in the warranty system.
Service Procedure
1.
Position J 41226-4 template around upper hinge and tape to vehicle.
Important:
When repairing a Suburban, you must remove .020" from the top of the hinge pins using a file or grinder. (This will remove the case hardness to ease
the drilling process.)
2.
Install J 41226-2 small drill guide bushing to J 41226-1 drill fixture.
Important:
The drill guide bushings are two sided to fit the top of the door hinge pins. Make sure to install the proper end that best fits the hinge pin head to