Suburban 3/4 Ton 4WD V8-393 6.5L DSL Turbo (1993)
Removing The Pulley And Bearing Retainer Ring
4. Bearing (5) from the pulley (6).
-
Remove the retaining ring (3).
Removing The Bearing From The Puller
-
Pulley (6) to J 21352-A.
-
Drive the bearing (5) from the pulley (6) with J 9398-A and J 8092.
Install or Connect
Tools Required:
J 6435 External Snap Ring Pliers
J 8092 Driver Handle
J 9481-A Pulley Bearing and Pulley Installer
Installing The Pulley Bearing
1. Bearing (5) to the pulley (6) with J 8092 and J 9481-A.
2. Retainer ring (4) to the pulley (6).