Suburban 3/4 Ton 4WD V8-393 6.5L DSL Turbo (1993)
Compressor Shaft Seal: Service and Repair
With SD-709/SD-7H15 Compressor
Compressor Components
Always replace the shaft seal assembly if it is disassembled. Never reuse any of the old parts.
To service the shaft seal without disassembling the clutch, perform steps 1 and 2 under "Clutch" and then proceed as follows.
Remove or Disconnect
Tools Required:
J 4245 internal Snap Ring Pliers
J 9553-01 Ring Remover
J 38468 Shaft Seal Remover and Installer
J 38479 Seal Seat Remover and Installer
1. Clutch shims (3) using J 9553-01 and a small screwdriver
2. Felt ring metal retainer (25).