Syclone V6-262 4.3L Turbo (1991)
Evaporator and Blower Case Replacement
REMOVE OR DISCONNECT
1. Refrigerant from the system.
2. Negative battery cable.
3. Resistor (145) with the wire attached.
4. Blower electrical connection.
5. Inlet line (111) to the evaporator (143).
6. Blower assembly mounting screws (139) and nuts (147).
7. Blower assembly from the vehicle.
8. Accumulator inlet line (108) from the evaporator (143).
9. Accumulator bracket (150) and screw (148).
10. Accumulator (4).
11. Screws (147).
12. Case sections (146 and 140).
13. Core (143).
INSTALL OR CONNECT
1. Core (143) to case sections (146 and 140) with screws (47).
2. Accumulator bracket (150) to the accumulator (4).
3. Accumulator (4) and bracket (150) to core (143) with screw (148).
IMPORTANT: Add 0.057 kg (2 oz.) of clean refrigerant oil PLUS an amount equal to that drained.