Syclone V6-262 4.3L Turbo (1991)
Turn Signal Switch: Service and Repair
Fig. 6 Compressing Lock Plate
1.
Disconnect battery ground cable.
2.
Remove steering wheel as outlined under STEERING WHEEL & HORN SOUNDER.
3.
Using a screwdriver, pry cover from lock plate.
4.
Using lock plate compressing tool No. J-23653, compress lock plate and pry retaining ring from groove on shaft, Fig. 6. Slowly release lock plate
compressing tool, remove tool and lock plate from shaft end.
5.
Slide canceling cam and upper bearing preload spring from end of shaft.
6.
Remove turn signal (multi-function) lever.
7.
Remove hazard warning knob retaining screw, button, spring and knob.
8.
Remove pivot arm.
9.
Remove switch retaining screws and pull switch up from column, guiding wire harness through column.
10.
Reverse procedure to install.
