Syclone V6-262 4.3L Turbo (1991)
6.
Install new buckle assembly (Figure 2, Item 2).
7.
Install retaining nuts (Figure 2, Item 1) on buckle assembly. Torque nuts to 38 Nm (28 ft.lbs.)
8.
Install seat in the vehicle.
9.
Install seat retaining nuts (Figure 1, Items 1 and 3). Torque nuts to 32 Nm (24 ft.lbs.)
10.
Install base covers (Figure 1, Item 2) and screws (Figure 1, Item 4).
11.
Install the GM Campaign Identification Label.
Campaign Identification Label
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label".
Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or a ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in by the
customer for periodic servicing. When installing the Campaign Identification Label, be sure to install the clear protective covering. Additional Campaign
Labels can be obtained from VISPAC Incorporated by calling 1-800-269-5100 (Monday-Friday, 8:00 a.m. to 4:30 p.m. EST). Ask for Item Number
S-1015 when ordering.
Apply the "Campaign Identification Label" only on a clean, dry surface.
Claim Information
Submit a Product Campaign claim with the information indicated above.
Refer to the General Motors Corporation Claims Processing Manual for details on Product Campaign Claim Submission.
Product Recall Campaign Supplement 96052A
File In Section: Product Campaigns
Bulletin No.: 96052(A) Supplement
Date: November, 1996
PRODUCT RECALL CAMPAIGN
PRODUCT SAFETY CAMPAIGN
SUBJECT:
96052(A) SUPPLEMENT - REAR SEAT BELT BUCKLE UNLATCH
