Terrain AWD L4-2.4L (2010)
Installation Procedure
Note: Inspect the CMP sensor for damage, replace as necessary.
1. Lubricate the CMP sensor O-ring seal with clean engine oil.
2. Install the CMP sensor.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
3. Install the CMP sensor bolt and tighten to 10 Nm (89 lb in).
4. Connect the engine wiring harness electrical connector (7) to the intake CMP sensor (6).
5. Install the fuel pump cover. Refer to Fuel Pump Cover Replacement (See: Fuel Delivery and Air Induction/Fuel Pump/Service and Repair/Fuel
Pump Cover Replacement)
6. Install the intake manifold cover. Refer to Intake Manifold Cover Replacement (See: Engine, Cooling and Exhaust/Engine/Intake
Manifold/Service and Repair/Intake Manifold Cover Replacement).
