Terrain AWD L4-2.4L (2010)
6. Remove the upper shock bolt.
7. Remove the shock from the vehicle.
Installation Procedure
1. Position the shock to the vehicle.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
2. Install the upper shock bolt and tighten to 110 Nm (81 lb ft).
3. Install the lower shock bolt and tighten to 110 Nm (81 lb ft).
4. Remove the jack stand from the lower control arm or the knuckle.
5. Install the rear wheel house in the vehicle. Refer to Rear Wheelhouse Panel Liner Replacement (Equinox) (See: Body and Frame/Fender/Rear
Fender/Rear Fender Liner/Service and Repair)Rear Wheelhouse Panel Liner Replacement (Terrain) (See: Body and Frame/Fender/Rear
Fender/Rear Fender Liner/Service and Repair).
6. Install the rear tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Wheels and Tires/Service and Repair).
