Terrain FWD L4-2.4L (2010)
Note: Install new brake hose fitting gaskets.
3. Assemble the brake hose fitting bolt (1) to the brake hose fitting (2) with 2 new brake hose fitting gaskets (3).
4. Install the brake hose assembly to the brake caliper and tighten the brake hose fitting bolt to 52 Nm (38 lb ft).
5. Bleed the hydraulic brake system. Refer to Hydraulic Brake System Bleeding (Manual) (See: Brake Bleeding/Service and Repair)Hydraulic
Brake System Bleeding (Pressure) (See: Brake Bleeding/Service and Repair).
6. Install the tire and wheel assembly. Refer to Tire and Wheel Removal and Installation (See: Maintenance/Wheels and Tires/Service and Repair).
