Terrain FWD L4-2.4L (2010)
Crankshaft Main Bearing Seal: Service and Repair
Crankshaft Rear Oil Seal Replacement
Special Tools
EN-42067 - Rear Main Seal Installer
For equivalent regional tools, refer to Special Tools (See: Tools and Equipment/Special Tools).
Removal Procedure
1. Remove the flywheel. Refer to Engine Flywheel Replacement (See: Transmission and Drivetrain/Flex Plate/Service and Repair).
Note: Do not damage the outside diameter of the crankshaft or chamber with any tool.
2. Pry out the crankshaft rear oil seal using a flat-bladed tool.
Installation Procedure
1. Using the EN-42067 - installer , install a NEW crankshaft real oil seal.
2. Install the flywheel. Refer to Engine Flywheel Replacement (See: Transmission and Drivetrain/Flex Plate/Service and Repair).