Terrain FWD L4-2.4L (2010)
*
Mounting points or mounting hardware for the SDM and seat belt anchor and/or retractor pretensioners-Inspect for any damage and repair or
replace each component as needed.
*
The seat cushion frame
*
The seat recliner and cover, if equipped
*
The seat adjuster
*
The seat back frame
*
Door trim assembly
*
Impacted seat cushion side covers and switches
Impact Sensor Replacement Guidelines
The impact sensor replacement policy requires replacing sensors in the area of the accident damage. The area of accident damage is defined as the
portion of the vehicle which is crushed, bent, or damaged due to a collision. An example of this would be a moderate collision where the front of the
vehicle impacts a object. If the vehicle has an impact sensor mounted forward of the radiator, it must be replaced.
*
Replace the impact sensor whether or not the air bags have deployed.
*
Replace the impact sensor even if it appears to be undamaged.
Impact sensor damage which is not visible, such as slight bending of the mounting bracket or cuts in the wire insulation, can cause improper operation of
the SIR system. Do not try to determine whether the impact sensor is undamaged, replace the impact sensor. Also, if you follow a diagnostic trouble code
(DTC) procedure and a malfunctioning impact sensor is indicated, replace the impact sensor.
