Terrain FWD L4-2.4L (2010)
4. Install the grommet (1) and cable assembly into the floor panel.
5. Connect the transmission range selector lever cable retainers (2) to the support bracket.
6. Install the front floor console extension. Refer to Front Floor Lower Console Side Finish Cover Replacement - Left Side (Equinox) (See: Body
and Frame/Interior Moulding / Trim/Console/Service and Repair/Front Floor Lower Console Side Finish Cover Replacement - Left Side)Front
Floor Lower Console Side Finish Cover Replacement - Left Side (Terrain) (See: Body and Frame/Interior Moulding / Trim/Console/Service and
Repair/Front Floor Lower Console Side Finish Cover Replacement - Left Side).
7. Connect the transmission range selector lever cable terminal (1) to the transmission manual shift lever pin (6).
8. Install the cable in the bracket, then slide the retainer (4) forward to lock the transmission range selector lever cable in the bracket.
9. Adjust the cable. Refer to Range Selector Lever Cable Adjustment (See: Adjustments)
Range Selector Lever Cable Bracket Replacement
Range Selector Lever Cable Bracket Replacement