V 2500 P/U 4WD V8-379 6.2L DSL (1990)
Power Steering Pump: Service and Repair
Power Steering Pump Replacement
POWER STEERING PUMP REPLACEMENT
TOOL REQUIRED:
-
J 25034-B Power Steering Pulley Remover
-
J 25033-B Power Steering Pump Pulley Installer
REMOVE OR DISCONNECT
-
Place a drain pan below the pump.
1. Battery ground cable.
2. Pump belt.
3. Hoses at the pump. Raise the hose up to prevent drainage of the oil. Cap or tape the ends of the hose and pump to prevent the entrance of dirt. On
models with remote reservoir, disconnect the reservoir hose at the pump. Cap the pump fittings.
-
Remove and cap remaining pump line.
4. Pump adjusting bolts, nuts and brackets.