V 3500 P/U 4WD V8-350 5.7L VIN M 4-bbl (1987)
![background image](/gmc/v_3500_p/u_4wd/v8-350_5.7l_vin_m_4-bbl/Page-1194002.png)
-
Verify the Leading and Trailing shoes are installed in the correct relationship.
-
Any contamination should be removed from the new shoes immediately. If very light hand sanding will not remove the contamination the shoes
should be discared.
-
When replacing shoes/linings or drums always replace both sides per axle. If only one side is replaced a steering pull may develop during braking.
-
If brake hardware is being replaced, verify that both the color and shape of the new springs match the old springs.
-
Prior to reinstalling the drum, the automatic adjuster will need to be backed off to accommodate for the increased thickness of the new
shoes/linings.