V 3500 P/U 4WD V8-350 5.7L VIN M 4-bbl (1987)
Fig. 8 Removing shaft seal
6.
Using tool J-9392, remove seal assembly. Press tool downward while turning it clockwise to engage tabs of seal assembly, then gently but firmly
pull tool straight out, Fig. 8.
Fig. 9 Removing shaft seal O-ring
7.
Using a hooked wire, remove seal seat O-ring, Fig. 9.
8.
Recheck shaft and inside of compressor neck. Make sure that these areas are perfectly clean before installing new parts.
Installation