Intake Air Temperature Sensor Location for W 3500 L4-52L DSL Turbo (2006)
Intake Air Temperature Sensor: Service and Repair
Mass Air Flow (MAF)/Intake Air Temperature (IAT) Sensor Replacement
Removal Procedure
1. Turn off the ignition.
2. Disconnect the MAF/IAT sensor connector.
3. Loosen the MAF/IAT sensor screw (2).
4. Remove the MAF/IAT sensor (1).
Installation Procedure
1. Install the MAF/IAT sensor (1).
2. Tighten the MAF/IAT sensor screw (2).
Tightening torque: 8 N-m (69 lb in)
3. Connect the MAF/IAT sensor connector.