Yukon/Denali 2WD V8-5.3L VIN Z Flex Fuel (2005)
3. Install the pinion yoke.
4. Notice: Refer to Pinion Flange/Yoke Installation Notice in Service Precautions.
Seat the pinion yoke onto the pinion shaft by tapping it with a soft-faced hammer until a few pinion shaft threads show through the yoke.
5. Install the washer.
6. Install the new pinion nut
7. Install the J 8614-01 onto the pinion yoke as shown.
8. Notice: Refer to Fastener Notice in Service Precautions.
Tighten the pinion nut while holding the J 8614-01 .