Yukon/Denali 2WD V8-6.0L VIN U (2004)
2. Install the module bolt.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolt to 9 N.m (80 lb in).
3. Connect the antenna cable to the module (3), if disconnected.
4. Connect the connector (2) to the rear quarter glass panel (1).
5. Install the cable (2, 3) to the roof cross member by pushing in the retainer clips (1).
6. Install the module bolt.
Tighten the bolt to 9 N.m (80 lb in).
7. Connect the antenna cable to the module (1).
8. Connect the connector (2) to the rear quarter glass panel (3).
9. Install the headliner.
