gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Brakes and Traction Control > < Input Shaft Speed Sensor Replacement|Page 6586

Yukon/Denali 2WD V8-6.0L VIN U (2004)

Page 2
background image

1. Lubricate the output speed sensor seal with automatic transmission fluid.
2. Install the output speed sensor (2).

Notice:  Refer to Fastener Notice in Service Precautions.

3. Install the output speed sensor bolt.

^

Tighten the bolt to 11 Nm (96 inch lbs.).

4. Connect the output speed sensor (2) electrical connector.
5. Lower the vehicle.

Brakes and Traction Control > < Input Shaft Speed Sensor Replacement|Page 6586