Yukon/Denali 4WD V8-5.3L VIN T (2004)
11. Move both front seats to the fully rearward.
12. Remove both front console side panel screws (1).
13. Disconnect the floor console electrical connector.
14. Remove the console assembly from the vehicle.
Installation Procedure
1. Install the floor console.
2. Connect the floor console electrical connector.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the screws (1) that retain the upper console bracket to the lower console bracket.
Tighten the retaining screws to 2 N.m (18 lb in).