Yukon/Denali 4WD V8-5.3L VIN T (2004)
Transmission Position Switch/Sensor: Service and Repair
Automatic Transmission - 4L80-E/4L85-E
Park/Neutral Position Switch Replacement
^
Tools Required
-
J 41364-A Park Neutral Switch Aligner
Removal Procedure
1. Apply the park brake.
2. Shift the transmission into neutral.
3. If equipped with 4-wheel drive (4WD), remove the front propeller shaft. Refer to Propeller Shaft Replacement - Front in Propeller Shaft.
4. Raise and suitably support the vehicle. Refer to Vehicle Lifting
5. Disconnect the park/neutral position (PNP) switch electrical connector (2).
6. Remove the range selector cable end (2) from the range selector lever ball stud (1).