Yukon/Denali XL 1500 2WD V8-6.0L VIN U (2005)
Seat Sensor/Switch: Service and Repair
INFLATABLE RESTRAINT SEAT POSITION SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the passenger or driver's seat from the vehicle.
2. Disconnect the electrical connector from the seat position sensor.
3. Drill out the rivets that retain the seat position sensor (1) to the seat adjuster track bracket.
CAUTION: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
4. Remove the seat position sensor from the seat adjuster track bracket.
INSTALLATION PROCEDURE
1. Install the seat position sensor to the seat adjuster bracket.
2. Install the rivets that retain the seat position sensor (1) to the seat adjuster track bracket.
3. Connect the electrical connector to the seat position sensor.
4. Install the passenger or driver's seat to the vehicle.
