Yukon/Denali XL 1500 4WD V8-6.0L VIN U (2004)
1. Ensure the bottom of the molding is seated in the slots on the I/P.
2. Align the molding retainers to the slots.
3. Press the moldings straight in till fully seated.
Garnish Molding Replacement - Center Pillar
Garnish Molding Replacement - Center Pillar
Removal Procedure
1. Remove the door sill plates.
2. Remove the pillar moldings by holding the moldings firmly while pulling out.
Installation Procedure
1. Install the pillar moldings by pushing until the molding locks into place.
2. Install the door sill trim plates.
Garnish Molding Replacement - Rear Corner
Garnish Molding Replacement - Rear Corner
Removal Procedure
1. Remove the rear upper garnish molding.