Yukon/Denali XL 1500 4WD V8-6.0L VIN U (2004)
2. Install the bolts (1) on the roller assembly (2).
Tighten the bolts to 53 N.m (39 lb ft).
3. Install the support rod (1) to the bottom of the seat.
4. Install the bolts (2) to the grab handle (1).
Tighten the bolts to 30 N.m (22 lb ft).
5. Install the J-Clips on the back of the seat.
6. Install the rear seat to the vehicle.
Seat Cushion Cover and Pad Replacement - Rear (60/40 Split - 50/50 Split)
SEAT CUSHION COVER AND PAD REPLACEMENT - REAR (60/40 SPLIT - 50/50 SPLIT)
REMOVAL PROCEDURE
1. Remove the rear passenger seat from the vehicle.
2. Remove the rear passenger seat riser.